Like to receive satellite Astra 28.2E and Astra 19.2E on My VU+ Duo2 receiver, have 2 tuners, 1 80cm dish, 2 LNB from sky satellite system. Can anyone advice me on what I need to get both satellite reception on my Duo2 box. Many thanks now I'm trying to configure this adapter for german DVB-S from Astra 19.2 E. My satelite dish has a multi LNB with 8 Ports. Like described in the WIKI I selected the adaper, enabled Autodetect muxes and idle scanning. Then I added the DVB Network by my location. But it doesn't find any services, and it says the signal sterngth is 0%: INVERTO Pro - Twin Monoblok 23mm LNB 4.3° (A=19,2/B=23,5) Monoblok TWIN s DiSEqC verze 1.0 přepínačem A (1)=Astra 19,2°, B (2)=Astra 23,5° navržený pro ČR a SR k příjmu satelitní televize Skylink. Ideální při použití s parabolou o průměru 80 cm, voděodolné provedení. Celý text. Ausgerichtet wird die Sat-Schüssel dann auf Astra1 19.2 Grad Ost. Das rechte, leicht schielende, LNB empfängt dann automatisch die Programme vom Astra3 23.5 Grad Ost. Der Abstand der beiden Satelliten von 4.3° Grad ist durch die Bauform des Monoblocks dann bereits eingestellt. Weitere Einstellungsarbeiten an der Außenanlage sind somit nicht This is a list of the free-to-air channels that are currently available via satellite from SES Astra satellites ( Astra 2E / 2F / 2G) at orbital position 28.2 °E, serving Ireland and the United Kingdom. Sky and Freesat use these satellites to deliver their channels. If one was to change providers between Sky and Freesat, one would not require Ich hab einen Sat mit einer Duo LNB ASTRA 19,2 und Astra 23,5. 2 Kabel zum Receiver, auf der Gigablue ist 6.4 installiert. ein CI-Modul mit der Skylink Karte. Vor der Gigablue UHD UE 4K funktionierte alles mit einem Topfield. Die Tuner hab ich wie im Bild eingestellt, alle Sender laufen. As the dish is not aligned to 13E the signal comes in at an angle from the left and is then reflected toward the right hand side of the dish arm. Just to confirm you will need to setup the Diseqc switch settings, 19.2E on port 1/a and 13E on port 2/b. If you don't it'll only use the first port as a default. RE: 2 LNB Astra 19.2 and Hotbird over SAT IP Config - Added by Greg Hekro over 3 years ago. Hi, i have HTS Tvheadend 4.2.8-34~g24a2f59e9 installed on a Raspi 3B. There are a Quad LNB with to Head for Hotbird and Astra. There are 4 cables connected to the Megasat Server. When i watch on my Panasonic TV all ok also on iPad with Zinwell SAT>IP App. 23000 2/3. ASTRA, n/a. 2. 2051. Occasional Feeds, data or inactive frequency (2016-08-24) 28.2°E. Astra 2E. 10876.00. JZrez9.

duo lnb astra 19 2 23 5